Restructured i3 config files

i3pystatus

@@ -1,86 +0,0 @@
-from i3pystatus import Status
-
-status = Status(standalone=True)
-
-# Displays clock like this:
-# Tue 30 Jul 11:59:46 PM KW31
-#                          ^-- calendar week
-status.register("clock",
-    format="%a %-d %b %X ",)
-
-# Shows the average load of the last minute and the last 5 minutes
-# (the default value for format is used)
-status.register("load")
-
-# Shows your CPU temperature, if you have a Intel CPU
-status.register("temp",
-    format="{temp:.0f}°C",)
-
-# The battery monitor has many formatting options, see README for details
-# This would look like this, when discharging (or charging)
-# ↓14.22W 56.15% [77.81%] 2h:41m
-# And like this if full:
-# =14.22W 100.0% [91.21%]
-#
-# This would also display a desktop notification (via D-Bus) if the percentage
-# goes below 5 percent while discharging. The block will also color RED.
-# If you don't have a desktop notification demon yet, take a look at dunst:
-#   http://www.knopwob.org/dunst/
-status.register("battery",
-    format="{status}/{percentage:.2f}% {remaining:%E%hh:%Mm}",
-    alert=True,
-    alert_percentage=5,
-    status={
-        "DIS": "↓",
-        "CHR": "↑",
-        "FULL": "=",
-    },)
-
-status.register("backlight",
-    format="☀ {percentage}%",
-    backlight="intel_backlight",
-)
-
-# Displays whether a DHCP client is running
-status.register("runwatch",
-    name="DHCP",
-    path="/var/run/dhclient*.pid",)
-
-# Shows the address and up/down state of eth0. If it is up the address is shown in
-# green (the default value of color_up) and the CIDR-address is shown
-# (i.e. 10.10.10.42/24).
-# If it's down just the interface name (eth0) will be displayed in red
-# (defaults of format_down and color_down)
-#
-# Note: the network module requires PyPI package netifaces
-status.register("network",
-    interface="enp3s0",
-    format_up="{v4cidr}",)
-
-# Note: requires both netifaces and basiciw (for essid and quality)
-status.register("network",
-    interface="wlp0s20u9",
-    format_up="{essid} {quality:03.0f}%",)
-
-# Shows disk usage of /
-# Format:
-# 42/128G [86G]
-status.register("disk",
-    path="/",
-    format="{used}/{total}G [{avail}G]",)
-
-# For /home
-status.register("disk",
-    path="/home",
-    format="{used}/{total}G [{avail}G]",)
-
-# Shows pulseaudio default sink volume
-#
-# Note: requires libpulseaudio from PyPI
-status.register("pulseaudio",
-    format="♪{volume}",)
-
-status.register("spotify",
-    format="{artist} - {title}",)
-
-status.run()