From 685e4dbe8bc6c33c5572f10d1673ca6e9c6a61fa Mon Sep 17 00:00:00 2001 From: Marcel Kapfer Date: Thu, 17 Feb 2022 18:06:30 +0100 Subject: [PATCH] Remove kitty config I'm not using it anymore. Well, I never really used it... --- kitty/kitty.conf | 913 ----------------------------------------------- 1 file changed, 913 deletions(-) delete mode 100644 kitty/kitty.conf diff --git a/kitty/kitty.conf b/kitty/kitty.conf deleted file mode 100644 index 5f6868b..0000000 --- a/kitty/kitty.conf +++ /dev/null @@ -1,913 +0,0 @@ -# vim:fileencoding=utf-8:ft=conf:foldmethod=marker - -#: Fonts {{{ - -#: kitty has very powerful font management. You can configure -#: individual font faces and even specify special fonts for particular -#: characters. - -font_family Iosevka -bold_font auto -italic_font auto -bold_italic_font auto - -#: You can specify different fonts for the bold/italic/bold-italic -#: variants. By default they are derived automatically, by the OSes -#: font system. Setting them manually is useful for font families that -#: have many weight variants like Book, Medium, Thick, etc. For -#: example:: - -#: font_family Operator Mono Book -#: bold_font Operator Mono Medium -#: italic_font Operator Mono Book Italic -#: bold_italic_font Operator Mono Medium Italic - -font_size 12.0 - -#: Font size (in pts) - -adjust_line_height 0 -adjust_column_width 0 - -#: Change the size of each character cell kitty renders. You can use -#: either numbers, which are interpreted as pixels or percentages -#: (number followed by %), which are interpreted as percentages of the -#: unmodified values. You can use negative pixels or percentages less -#: than 100% to reduce sizes (but this might cause rendering -#: artifacts). - -# symbol_map U+E0A0-U+E0A2,U+E0B0-U+E0B3 PowerlineSymbols - -#: Map the specified unicode codepoints to a particular font. Useful -#: if you need special rendering for some symbols, such as for -#: Powerline. Avoids the need for patched fonts. Each unicode code -#: point is specified in the form U+. You -#: can specify multiple code points, separated by commas and ranges -#: separated by hyphens. symbol_map itself can be specified multiple -#: times. Syntax is:: - -#: symbol_map codepoints Font Family Name - -box_drawing_scale 0.001, 1, 1.5, 2 - -#: Change the sizes of the lines used for the box drawing unicode -#: characters These values are in pts. They will be scaled by the -#: monitor DPI to arrive at a pixel value. There must be four values -#: corresponding to thin, normal, thick, and very thick lines. - -#: }}} - -#: Cursor customization {{{ - -cursor #cccccc - -#: Default cursor color - -cursor_text_color #111111 - -#: Choose the color of text under the cursor. If you want it rendered -#: with the background color of the cell underneath instead, use the -#: special keyword: background - -cursor_shape beam - -#: The cursor shape can be one of (block, beam, underline) - -cursor_blink_interval 0 -cursor_stop_blinking_after 15.0 - -#: The interval (in seconds) at which to blink the cursor. Set to zero -#: to disable blinking. Note that numbers smaller than repaint_delay -#: will be limited to repaint_delay. Stop blinking cursor after the -#: specified number of seconds of keyboard inactivity. Set to zero to -#: never stop blinking. - -#: }}} - -#: Scrollback {{{ - -scrollback_lines 2000 - -#: Number of lines of history to keep in memory for scrolling back. -#: Memory is allocated on demand. Negative numbers are (effectively) -#: infinite scrollback. Note that using very large scrollback is not -#: recommended as it can slow down resizing of the terminal and also -#: use large amounts of RAM. - -scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER - -#: Program with which to view scrollback in a new window. The -#: scrollback buffer is passed as STDIN to this program. If you change -#: it, make sure the program you use can handle ANSI escape sequences -#: for colors and text formatting. INPUT_LINE_NUMBER in the command -#: line above will be replaced by an integer representing which line -#: should be at the top of the screen. - -scrollback_pager_history_size 0 - -#: Separate scrollback history size, used only for browsing the -#: scrollback buffer (in MB). This separate buffer is not available -#: for interactive scrolling but will be piped to the pager program -#: when viewing scrollback buffer in a separate window. The current -#: implementation stores one character in 4 bytes, so approximatively -#: 2500 lines per megabyte at 100 chars per line. A value of zero or -#: less disables this feature. The maximum allowed size is 4GB. - -wheel_scroll_multiplier 5.0 - -#: Modify the amount scrolled by the mouse wheel. Note this is only -#: used for low precision scrolling devices, not for high precision -#: scrolling on platforms such as macOS and Wayland. Use negative -#: numbers to change scroll direction. - -touch_scroll_multiplier 1.0 - -#: Modify the amount scrolled by a touchpad. Note this is only used -#: for high precision scrolling devices on platforms such as macOS and -#: Wayland. Use negative numbers to change scroll direction. - -#: }}} - -#: Mouse {{{ - -url_color #0087BD -url_style curly - -#: The color and style for highlighting URLs on mouse-over. url_style -#: can be one of: none, single, double, curly - -open_url_modifiers kitty_mod - -#: The modifier keys to press when clicking with the mouse on URLs to -#: open the URL - -open_url_with default - -#: The program with which to open URLs that are clicked on. The -#: special value default means to use the operating system's default -#: URL handler. - -copy_on_select no - -#: Copy to clipboard on select. With this enabled, simply selecting -#: text with the mouse will cause the text to be copied to clipboard. -#: Useful on platforms such as macOS that do not have the concept of -#: primary selections. Note that this is a security risk, as all -#: programs, including websites open in your browser can read the -#: contents of the clipboard. - -rectangle_select_modifiers ctrl+alt - -#: The modifiers to use rectangular selection (i.e. to select text in -#: a rectangular block with the mouse) - -select_by_word_characters :@-./_~?&=%+# - -#: Characters considered part of a word when double clicking. In -#: addition to these characters any character that is marked as an -#: alpha-numeric character in the unicode database will be matched. - -click_interval -1.0 - -#: The interval between successive clicks to detect double/triple -#: clicks (in seconds). Negative numbers will use the system default -#: instead, if available, or fallback to 0.5. - -mouse_hide_wait 3.0 - -#: Hide mouse cursor after the specified number of seconds of the -#: mouse not being used. Set to zero to disable mouse cursor hiding. - -focus_follows_mouse no - -#: Set the active window to the window under the mouse when moving the -#: mouse around - -#: }}} - -#: Performance tuning {{{ - -repaint_delay 10 - -#: Delay (in milliseconds) between screen updates. Decreasing it, -#: increases frames-per-second (FPS) at the cost of more CPU usage. -#: The default value yields ~100 FPS which is more than sufficient for -#: most uses. Note that to actually achieve 100 FPS you have to either -#: set sync_to_monitor to no or use a monitor with a high refresh -#: rate. - -input_delay 3 - -#: Delay (in milliseconds) before input from the program running in -#: the terminal is processed. Note that decreasing it will increase -#: responsiveness, but also increase CPU usage and might cause flicker -#: in full screen programs that redraw the entire screen on each loop, -#: because kitty is so fast that partial screen updates will be drawn. - -sync_to_monitor yes - -#: Sync screen updates to the refresh rate of the monitor. This -#: prevents tearing (https://en.wikipedia.org/wiki/Screen_tearing) -#: when scrolling. However, it limits the rendering speed to the -#: refresh rate of your monitor. With a very high speed mouse/high -#: keyboard repeat rate, you may notice some slight input latency. If -#: so, set this to no. - -#: }}} - -#: Terminal bell {{{ - -enable_audio_bell no - -#: Enable/disable the audio bell. Useful in environments that require -#: silence. - -visual_bell_duration 0.0 - -#: Visual bell duration. Flash the screen when a bell occurs for the -#: specified number of seconds. Set to zero to disable. - -window_alert_on_bell yes - -#: Request window attention on bell. Makes the dock icon bounce on -#: macOS or the taskbar flash on linux. - -bell_on_tab yes - -#: Show a bell symbol on the tab if a bell occurs in one of the -#: windows in the tab and the window is not the currently focused -#: window - -#: }}} - -#: Window layout {{{ - -remember_window_size yes -initial_window_width 640 -initial_window_height 400 - -#: If enabled, the window size will be remembered so that new -#: instances of kitty will have the same size as the previous -#: instance. If disabled, the window will initially have size -#: configured by initial_window_width/height, in pixels. You can use a -#: suffix of "c" on the width/height values to have them interpreted -#: as number of cells instead of pixels. - -enabled_layouts * - -#: The enabled window layouts. A comma separated list of layout names. -#: The special value all means all layouts. The first listed layout -#: will be used as the startup layout. For a list of available -#: layouts, see the -#: https://sw.kovidgoyal.net/kitty/index.html#layouts. - -window_resize_step_cells 2 -window_resize_step_lines 2 - -#: The step size (in units of cell width/cell height) to use when -#: resizing windows. The cells value is used for horizontal resizing -#: and the lines value for vertical resizing. - -window_border_width 1.0 - -#: The width (in pts) of window borders. Will be rounded to the -#: nearest number of pixels based on screen resolution. Note that -#: borders are displayed only when more than one window is visible. -#: They are meant to separate multiple windows. - -draw_minimal_borders yes - -#: Draw only the minimum borders needed. This means that only the -#: minimum needed borders for inactive windows are drawn. That is only -#: the borders that separate the inactive window from a neighbor. Note -#: that setting a non-zero window margin overrides this and causes all -#: borders to be drawn. - -window_margin_width 0.0 - -#: The window margin (in pts) (blank area outside the border) - -single_window_margin_width -1000.0 - -#: The window margin (in pts) to use when only a single window is -#: visible. Negative values will cause the value of -#: window_margin_width to be used instead. - -window_padding_width 0.0 - -#: The window padding (in pts) (blank area between the text and the -#: window border) - -active_border_color #00ff00 - -#: The color for the border of the active window - -inactive_border_color #cccccc - -#: The color for the border of inactive windows - -bell_border_color #ff5a00 - -#: The color for the border of inactive windows in which a bell has -#: occurred - -inactive_text_alpha 1.0 - -#: Fade the text in inactive windows by the specified amount (a number -#: between zero and one, with zero being fully faded). - -hide_window_decorations no - -#: Hide the window decorations (title-bar and window borders). Whether -#: this works and exactly what effect it has depends on the window -#: manager/operating system. - -#: }}} - -#: Tab bar {{{ - -tab_bar_edge bottom - -#: Which edge to show the tab bar on, top or bottom - -tab_bar_margin_width 0.0 - -#: The margin to the left and right of the tab bar (in pts) - -tab_bar_style fade - -#: The tab bar style, can be one of: fade, separator or hidden. In the -#: fade style, each tab's edges fade into the background color, in the -#: separator style, tabs are separated by a configurable separator. - -tab_fade 0.25 0.5 0.75 1 - -#: Control how each tab fades into the background when using fade for -#: the tab_bar_style. Each number is an alpha (between zero and one) -#: that controls how much the corresponding cell fades into the -#: background, with zero being no fade and one being full fade. You -#: can change the number of cells used by adding/removing entries to -#: this list. - -tab_separator " ┇" - -#: The separator between tabs in the tab bar when using separator as -#: the tab_bar_style. - -tab_title_template {title} - -#: A template to render the tab title. The default just renders the -#: title. If you wish to include the tab-index as well, use something -#: like: {index}: {title}. Useful if you have shortcuts mapped for -#: goto_tab N. - -active_tab_foreground #000 -active_tab_background #eee -active_tab_font_style bold-italic -inactive_tab_foreground #444 -inactive_tab_background #999 -inactive_tab_font_style normal - -#: Tab bar colors and styles - -#: }}} - -#: Color scheme {{{ - -foreground #ebdbb2 -background #282828 - -#: The foreground and background colors - -background_opacity 1.0 -dynamic_background_opacity no - -#: The opacity of the background. A number between 0 and 1, where 1 is -#: opaque and 0 is fully transparent. This will only work if -#: supported by the OS (for instance, when using a compositor under -#: X11). Note that it only sets the default background color's -#: opacity. This is so that things like the status bar in vim, -#: powerline prompts, etc. still look good. But it means that if you -#: use a color theme with a background color in your editor, it will -#: not be rendered as transparent. Instead you should change the -#: default background color in your kitty config and not use a -#: background color in the editor color scheme. Or use the escape -#: codes to set the terminals default colors in a shell script to -#: launch your editor. Be aware that using a value less than 1.0 is a -#: (possibly significant) performance hit. If you want to dynamically -#: change transparency of windows set dynamic_bacground_opacity to -#: yes (this is off by default as it has a performance cost) - -dim_opacity 0.75 - -#: How much to dim text that has the DIM/FAINT attribute set. One -#: means no dimming and zero means fully dimmed (i.e. invisible). - -selection_foreground #282828 -selection_background #ebdbb2 - -#: The foreground and background for text selected with the mouse - - -#: The 16 terminal colors. There are 8 basic colors, each color has a -#: dull and bright version. You can also set the remaining colors from -#: the 256 color table as color16 to color255. - -color0 #282828 -color8 #928374 - -#: black - -color1 #cc241d -color9 #fb4934 - -#: red - -color2 #98971a -color10 #b8bb26 - -#: green - -color3 #d79921 -color11 #fabd2f - -#: yellow - -color4 #458588 -color12 #83a598 - -#: blue - -color5 #b16286 -color13 #d3869b - -#: magenta - -color6 #689d6a -color14 #8ec07c - -#: cyan - -color7 #a89984 -color15 #ebdbb2 - -#: white - -#: }}} - -#: Advanced {{{ - -shell . - -#: The shell program to execute. The default value of . means to use -#: whatever shell is set as the default shell for the current user. -#: Note that on macOS if you change this, you might need to add -#: --login to ensure that the shell starts in interactive mode and -#: reads its startup rc files. - -editor . - -#: The console editor to use when editing the kitty config file or -#: similar tasks. A value of . means to use the environment variable -#: EDITOR. Note that this environment variable has to be set not just -#: in your shell startup scripts but system-wide, otherwise kitty will -#: not see it. - -close_on_child_death no - -#: Close the window when the child process (shell) exits. If no (the -#: default), the terminal will remain open when the child exits as -#: long as there are still processes outputting to the terminal (for -#: example disowned or backgrounded processes). If yes, the window -#: will close as soon as the child process exits. Note that setting it -#: to yes means that any background processes still using the terminal -#: can fail silently because their stdout/stderr/stdin no longer work. - -allow_remote_control no - -#: Allow other programs to control kitty. If you turn this on other -#: programs can control all aspects of kitty, including sending text -#: to kitty windows, opening new windows, closing windows, reading the -#: content of windows, etc. Note that this even works over ssh -#: connections. - -# env - -#: Specify environment variables to set in all child processes. Note -#: that environment variables are expanded recursively, so if you -#: use:: - -#: env MYVAR1=a -#: env MYVAR2=${MYVAR1}/${HOME}/b - -#: The value of MYVAR2 will be a//b. - -startup_session none - -#: Path to a session file to use for all kitty instances. Can be -#: overridden by using the kitty --session command line option for -#: individual instances. See -#: https://sw.kovidgoyal.net/kitty/index.html#sessions in the kitty -#: documentation for details. Note that relative paths are interpreted -#: with respect to the kitty config directory. Environment variables -#: in the path are expanded. - -clipboard_control write-clipboard write-primary - -#: Allow programs running in kitty to read and write from the -#: clipboard. You can control exactly which actions are allowed. The -#: set of possible actions is: write-clipboard read-clipboard write- -#: primary read-primary The default is to allow writing to the -#: clipboard and primary selection. Note that enabling the read -#: functionality is a security risk as it means that any program, even -#: one running on a remote server via SSH can read your clipboard. - -term xterm-kitty - -#: The value of the TERM environment variable to set. Changing this -#: can break many terminal programs, only change it if you know what -#: you are doing, not because you read some advice on Stack Overflow -#: to change it. The TERM variable if used by various programs to get -#: information about the capabilities and behavior of the terminal. If -#: you change it, depending on what programs you run, and how -#: different the terminal you are changing it to is, various things -#: from key-presses, to colors, to various advanced features may not -#: work. - -#: }}} - -#: OS specific tweaks {{{ - -macos_titlebar_color system - -#: Change the color of the kitty window's titlebar on macOS. A value -#: of system means to use the default system color, a value of -#: background means to use the background color of the currently -#: active window and finally you can use an arbitrary color, such as -#: #12af59 or red. WARNING: This option works by using a hack, as -#: there is no proper Cocoa API for it. It sets the background color -#: of the entire window and makes the titlebar transparent. As such it -#: is incompatible with background_opacity. If you want to use both, -#: you are probably better off just hiding the titlebar with -#: hide_window_decorations. - -macos_option_as_alt yes - -#: Use the option key as an alt key. With this set to no, kitty will -#: use the macOS native Option+Key = unicode character behavior. This -#: will break any Alt+key keyboard shortcuts in your terminal -#: programs, but you can use the macOS unicode input technique. - -macos_hide_from_tasks no - -#: Hide the kitty window from running tasks (Option+Tab) on macOS. - -macos_quit_when_last_window_closed no - -#: Have kitty quit when all the top-level windows are closed. By -#: default, kitty will stay running, even with no open windows, as is -#: the expected behavior on macOS. - -macos_window_resizable yes - -#: Disable this if you want kitty top-level (OS) windows to not be -#: resizable on macOS. - -macos_thicken_font 0 - -#: Draw an extra border around the font with the given width, to -#: increase legibility at small font sizes. For example, a value of -#: 0.75 will result in rendering that looks similar to sub-pixel -#: antialiasing at common font sizes. - -macos_traditional_fullscreen no - -#: Use the traditional full-screen transition, that is faster, but -#: less pretty. - -macos_custom_beam_cursor no - -#: Enable/disable custom mouse cursor for macOS that is easier to see -#: on both light and dark backgrounds. WARNING: this might make your -#: mouse cursor invisible on dual GPU machines. - -#: }}} - -#: Keyboard shortcuts {{{ - -#: For a list of key names, see: GLFW keys -#: . The name to use -#: is the part after the GLFW_KEY_ prefix. For a list of modifier -#: names, see: GLFW mods -#: - -#: On Linux you can also use XKB key names to bind keys that are not -#: supported by GLFW. See XKB keys -#: for a list of key names. The name to use is the part -#: after the XKB_KEY_ prefix. Note that you should only use an XKB key -#: name for keys that are not present in the list of GLFW keys. - -#: Finally, you can use raw system key codes to map keys. To see the -#: system key code for a key, start kitty with the kitty --debug- -#: keyboard option. Then kitty will output some debug text for every -#: key event. In that text look for ``native_code`` the value of that -#: becomes the key name in the shortcut. For example: - -#: .. code-block:: none - -#: on_key_input: glfw key: 65 native_code: 0x61 action: PRESS mods: 0x0 text: 'a' - -#: Here, the key name for the A key is 0x61 and you can use it with:: - -#: map ctrl+0x61 something - -#: to map ctrl+a to something. - -#: You can use the special action no_op to unmap a keyboard shortcut -#: that is assigned in the default configuration. - -#: You can combine multiple actions to be triggered by a single -#: shortcut, using the syntax below:: - -#: map key combine action1 action2 action3 ... - -#: For example:: - -#: map kitty_mod+e combine : new_window : next_layout - -#: this will create a new window and switch to the next available -#: layout - -#: You can use multi-key shortcuts using the syntax shown below:: - -#: map key1>key2>key3 action - -#: For example:: - -#: map ctrl+f>2 set_font_size 20 - -kitty_mod ctrl+shift - -#: The value of kitty_mod is used as the modifier for all default -#: shortcuts, you can change it in your kitty.conf to change the -#: modifiers for all the default shortcuts. - -clear_all_shortcuts no - -#: You can have kitty remove all shortcut definition seen up to this -#: point. Useful, for instance, to remove the default shortcuts. - -#: Clipboard {{{ - -map kitty_mod+c copy_to_clipboard - -#: There is also a copy_or_interrupt action that can be optionally -#: mapped to Ctrl+c. It will copy only if there is a selection and -#: send an interrupt otherwise. - -map kitty_mod+v paste_from_clipboard -map kitty_mod+s paste_from_selection -map shift+insert paste_from_selection -map kitty_mod+o pass_selection_to_program - -#: You can also pass the contents of the current selection to any -#: program using pass_selection_to_program. By default, the system's -#: open program is used, but you can specify your own, for example:: - -#: map kitty_mod+o pass_selection_to_program firefox - -#: You can pass the current selection to a terminal program running in -#: a new kitty window, by using the @selection placeholder:: - -#: map kitty_mod+y new_window less @selection - -#: }}} - -#: Scrolling {{{ - -map kitty_mod+up scroll_line_up -map kitty_mod+k scroll_line_up -map kitty_mod+down scroll_line_down -map kitty_mod+j scroll_line_down -map kitty_mod+page_up scroll_page_up -map kitty_mod+page_down scroll_page_down -map kitty_mod+home scroll_home -map kitty_mod+end scroll_end -map kitty_mod+h show_scrollback - -#: You can pipe the contents of the current screen + history buffer as -#: STDIN to an arbitrary program using the ``pipe`` function. For -#: example, the following opens the scrollback buffer in less in an -#: overlay window:: - -#: map f1 pipe @ansi overlay less +G -R - -#: For more details on piping screen and buffer contents to external -#: programs, see pipe. - -#: }}} - -#: Window management {{{ - -map kitty_mod+enter new_window - -#: You can open a new window running an arbitrary program, for -#: example:: - -#: map kitty_mod+y new_window mutt - -#: You can open a new window with the current working directory set to -#: the working directory of the current window using:: - -#: map ctrl+alt+enter new_window_with_cwd - -#: You can open a new window that is allowed to control kitty via the -#: kitty remote control facility by prefixing the command line with @. -#: Any programs running in that window will be allowed to control -#: kitty. For example:: - -#: map ctrl+enter new_window @ some_program - -map kitty_mod+n new_os_window -map kitty_mod+w close_window -map kitty_mod+] next_window -map kitty_mod+[ previous_window -map kitty_mod+f move_window_forward -map kitty_mod+b move_window_backward -map kitty_mod+` move_window_to_top -map kitty_mod+r start_resizing_window -map kitty_mod+1 first_window -map kitty_mod+2 second_window -map kitty_mod+3 third_window -map kitty_mod+4 fourth_window -map kitty_mod+5 fifth_window -map kitty_mod+6 sixth_window -map kitty_mod+7 seventh_window -map kitty_mod+8 eighth_window -map kitty_mod+9 ninth_window -map kitty_mod+0 tenth_window -#: }}} - -#: Tab management {{{ - -map kitty_mod+right next_tab -map kitty_mod+left previous_tab -map kitty_mod+t new_tab -map kitty_mod+q close_tab -map kitty_mod+. move_tab_forward -map kitty_mod+, move_tab_backward -map kitty_mod+alt+t set_tab_title - -#: You can also create shortcuts to go to specific tabs, with 1 being -#: the first tab, 2 the second tab and -1 being the previously active -#: tab:: - -#: map ctrl+alt+1 goto_tab 1 -#: map ctrl+alt+2 goto_tab 2 - -#: Just as with new_window above, you can also pass the name of -#: arbitrary commands to run when using new_tab and use -#: new_tab_with_cwd. Finally, if you want the new tab to open next to -#: the current tab rather than at the end of the tabs list, use:: - -#: map ctrl+t new_tab !neighbor [optional cmd to run] -#: }}} - -#: Layout management {{{ - -map kitty_mod+l next_layout - -#: You can also create shortcuts to switch to specific layouts:: - -#: map ctrl+alt+t goto_layout tall -#: map ctrl+alt+s goto_layout stack - -#: Similarly, to switch back to the previous layout:: - -#: map ctrl+alt+p last_used_layout -#: }}} - -#: Font sizes {{{ - -#: You can change the font size for all top-level kitty OS windows at -#: a time or only the current one. - -map kitty_mod+equal change_font_size all +2.0 -map kitty_mod+minus change_font_size all -2.0 -map kitty_mod+backspace change_font_size all 0 - -#: To setup shortcuts for specific font sizes:: - -#: map kitty_mod+f6 change_font_size all 10.0 - -#: To setup shortcuts to change only the current OS window's font -#: size:: - -#: map kitty_mod+f6 change_font_size current 10.0 -#: }}} - -#: Select and act on visible text {{{ - -#: Use the hints kitten to select text and either pass it to an -#: external program or insert it into the terminal or copy it to the -#: clipboard. - -map kitty_mod+e kitten hints - -#: Open a currently visible URL using the keyboard. The program used -#: to open the URL is specified in open_url_with. - -map kitty_mod+p>f kitten hints --type path --program - - -#: Select a path/filename and insert it into the terminal. Useful, for -#: instance to run git commands on a filename output from a previous -#: git command. - -map kitty_mod+p>shift+f kitten hints --type path - -#: Select a path/filename and open it with the default open program. - -map kitty_mod+p>l kitten hints --type line --program - - -#: Select a line of text and insert it into the terminal. Use for the -#: output of things like: ls -1 - -map kitty_mod+p>w kitten hints --type word --program - - -#: Select words and insert into terminal. - -map kitty_mod+p>h kitten hints --type hash --program - - -#: Select something that looks like a hash and insert it into the -#: terminal. Useful with git, which uses sha1 hashes to identify -#: commits - - -#: The hints kitten has many more modes of operation that you can map -#: to different shortcuts. For a full description see kittens/hints. -#: }}} - -#: Miscellaneous {{{ - -map kitty_mod+f11 toggle_fullscreen -map kitty_mod+u kitten unicode_input -map kitty_mod+f2 edit_config_file -map kitty_mod+escape kitty_shell window - -#: Open the kitty shell in a new window/tab/overlay/os_window to -#: control kitty using commands. - -map kitty_mod+a>m set_background_opacity +0.1 -map kitty_mod+a>l set_background_opacity -0.1 -map kitty_mod+a>1 set_background_opacity 1 -map kitty_mod+a>d set_background_opacity default -map kitty_mod+delete clear_terminal reset active - -#: You can create shortcuts to clear/reset the terminal. For example:: - -#: # Reset the terminal -#: map kitty_mod+f9 clear_terminal reset active -#: # Clear the terminal screen by erasing all contents -#: map kitty_mod+f10 clear_terminal clear active -#: # Clear the terminal scrollback by erasing it -#: map kitty_mod+f11 clear_terminal scrollback active -#: # Scroll the contents of the screen into the scrollback -#: map kitty_mod+f12 clear_terminal scroll active - -#: If you want to operate on all windows instead of just the current -#: one, use all instead of :italic`active`. - -#: It is also possible to remap Ctrl+L to both scroll the current -#: screen contents into the scrollback buffer and clear the screen, -#: instead of just clearing the screen:: - -#: map ctrl+l combine : clear_terminal scroll active : send_text normal,application - - -#: You can tell kitty to send arbitrary (UTF-8) encoded text to the -#: client program when pressing specified shortcut keys. For example:: - -#: map ctrl+alt+a send_text all Special text - -#: This will send "Special text" when you press the ctrl+alt+a key -#: combination. The text to be sent is a python string literal so you -#: can use escapes like \x1b to send control codes or \u21fb to send -#: unicode characters (or you can just input the unicode characters -#: directly as UTF-8 text). The first argument to send_text is the -#: keyboard modes in which to activate the shortcut. The possible -#: values are normal or application or kitty or a comma separated -#: combination of them. The special keyword all means all modes. The -#: modes normal and application refer to the DECCKM cursor key mode -#: for terminals, and kitty refers to the special kitty extended -#: keyboard protocol. - -#: Another example, that outputs a word and then moves the cursor to -#: the start of the line (same as pressing the Home key):: - -#: map ctrl+alt+a send_text normal Word\x1b[H -#: map ctrl+alt+a send_text application Word\x1bOH - -#: }}} - -# }}}